In stock

6.35mm Mono Plug (metal)

CON-635-MONO

A solder-on metal 6.35 mm mono plug for instrument and speaker leads.

Type: Adapter
Connectors: 6.35mm-mono

In-depth technical details

A 6.35mm mono (TS) plug has one insulating band and one signal contact -- tip and sleeve only, no ring -- distinct from a stereo/balanced TRS plug which has two bands. The band count on the plug itself is the real, checkable way to tell which wiring it carries.

Request a quote on WhatsApp

Connector anatomy

6.35 mm mono jack

01 Tip Carries the left channel in stereo use, or the whole signal in mono.
02 Sleeve The common ground — the voltage reference the signal is measured against.
03 Insulating bands The black bands keep the conductors apart. Without them the channels short to ground.
04 Strain-relief boot Stops the wires flexing where they leave the plug — the exact point most cables fail.
05 Outer jacket The outer sheath protecting the conductors inside from abrasion and moisture.

Technical illustration, not a photo of the actual product

From the published standard

How it works

A loose plug is hand-soldered onto the end of a cable, typically used to repair an existing lead or to build a custom length. A mono (TS) plug has only a tip and sleeve with no ring, suited to a single-channel signal such as an instrument output.

Contacts (mono): Tip and sleeve only, no ring
Typical use: Repairing a cable, or building one to a custom length

This information comes from published sources about this type of product, not from the supplier.

en.wikipedia.org

Technical specifications

Type	Adapter
Connectors	6.35mm-mono

Not sure this is the right part?

Ask on WhatsApp, and get an answer from a team that actually knows the stock.

Request a quote on WhatsApp