Alwazour Technical
AR Request a quote on WhatsApp
Digital to Analog Audio Converter
In stock

Digital to Analog Audio Converter

CVT-DAC-OPT

Converts digital audio leaving a television over optical or coaxial into analogue audio on RCA outputs or a 3.5 mm jack.

Type
Converter
Connectors
RCA / 3.5mm
In-depth technical details

Composite/stereo RCA uses yellow for video and white/red for stereo audio; the 3.5mm end carries the same stereo pair via its TRS tip/ring/sleeve wiring, converted to the two RCA audio plugs.

End A

RCA / phono

  • 01 Centre pin Carries the signal itself — one channel of audio, or a whole composite video picture.
  • 02 Outer collar Ground and shield in one. It mates before the centre pin, which is what stops the loud pop.
  • 03 Colour code Red is right, white is left, yellow is composite video. A convention only — electrically the plugs are identical.
  • 04 Strain-relief boot Stops the wires flexing where they leave the plug — the exact point most cables fail.
  • 05 Outer jacket The outer sheath protecting the conductors inside from abrasion and moisture.

Technical illustration, not a photo of the actual product

3.5mm

End B

3.5 mm jack

  • 01 Tip Carries the left channel in stereo use, or the whole signal in mono.
  • 02 Ring The right channel. Crackle when you wiggle the plug is this ring losing contact.
  • 03 Sleeve The common ground — the voltage reference the signal is measured against.
  • 04 Insulating bands The black bands keep the conductors apart. Without them the channels short to ground.
  • 05 Strain-relief boot Stops the wires flexing where they leave the plug — the exact point most cables fail.
  • 06 Outer jacket The outer sheath protecting the conductors inside from abrasion and moisture.

Technical illustration, not a photo of the actual product

Digital to Analog AudioConverter

Where this fits in the system

Type
Converter
Connectors
RCA / 3.5mm

From the published standard

How it works

A modern TV often outputs audio only digitally, over an optical or coaxial S/PDIF cable, with no analogue output at all. The converter carries a real DAC chip that rebuilds the analogue waveform from the digital stream, so it can drive RCA or a 3.5mm jack into a traditional amplifier or speakers that only understand analogue audio.

Function
Real DAC chip: digital S/PDIF (optical/coaxial) in, analogue RCA/3.5mm out
Why needed
Many modern TVs have no analogue audio output at all

This information comes from published sources about this type of product, not from the supplier.

Technical specifications

TypeConverter
ConnectorsRCA / 3.5mm

Not sure this is the right part?

Ask on WhatsApp, and get an answer from a team that actually knows the stock.

Request a quote on WhatsApp
In stock Request a quote on WhatsApp
WhatsApp

Type to search