In stock

Speakon to 6.35mm Adapter

CON-NL4-635

Adapts a Speakon speaker output to a 6.35 mm jack.

Type: Adapter
Connectors: 6.35mm

In-depth technical details

6.35mm audio jacks are TS, TRS, or TRRS depending on the number of insulating bands visible on the plug -- TS (mono) has one band, TRS (stereo, or balanced mono line-level) has two. The band count on the actual plug is the real, checkable way to tell which wiring a cable carries.

Request a quote on WhatsApp

Connector anatomy

6.35 mm jack

01 Tip Carries the left channel in stereo use, or the whole signal in mono.
02 Ring The right channel. Crackle when you wiggle the plug is this ring losing contact.
03 Sleeve The common ground — the voltage reference the signal is measured against.
04 Insulating bands The black bands keep the conductors apart. Without them the channels short to ground.
05 Strain-relief boot Stops the wires flexing where they leave the plug — the exact point most cables fail.
06 Outer jacket The outer sheath protecting the conductors inside from abrasion and moisture.

Technical illustration, not a photo of the actual product

From the published standard

How it works

A jack plug carries the signal on three parts: the tip for the left channel, the ring for the right, and the sleeve as common ground, separated by insulating bands. The 3.5 mm and 6.35 mm sizes are electrically identical and differ only in size, which is why an adapter between them is just wire. Crackle when the plug is moved is worn contact at the ring, not a fault in the equipment.

Contacts: Tip (left), ring (right), sleeve (ground)
3.5 mm vs 6.35 mm: Electrically identical, different size only
Balance: Unbalanced — susceptible to hum on long runs

This information comes from published sources about this type of product, not from the supplier.

en.wikipedia.org

Technical specifications

Type	Adapter
Connectors	6.35mm

Not sure this is the right part?

Ask on WhatsApp, and get an answer from a team that actually knows the stock.

Request a quote on WhatsApp