Alwazour Technical
Alwazour Technical
PATCH-CAT7-1M
Ready-made 1m network patch lead with RJ45 ends, copper conductor.
Cat5e/Cat6/Cat7 RJ45 cabling uses one of two equivalent wiring standards, T568A or T568B (they differ only in which pair sits on pins 1-2 vs 3-6) -- performance is identical as long as both ends of the same cable use the same standard.
From its box
Scroll to explore
Connector anatomy
Technical illustration, not a photo of the actual product
How it works
Four pairs, each twisted at a different rate from its neighbour. The twisting makes both wires of a pair pick up identical noise, which then cancels when the far end subtracts them. That alone is why networking works over a hundred metres.
This cable is shielded: a grounded conductive layer around the pairs, which earns its place near mains cable or motors.
Technical illustration, not a photo of the actual product
From the published standard
Four copper pairs, each twisted at a different rate from its neighbour. The twisting makes both wires of a pair pick up identical noise, which then cancels when the far end subtracts them — that alone is why networking works over a hundred metres. The 100 metre figure in TIA-568 is a limit on the whole channel, meaning the permanent run plus the short patch leads at each end, not on the cable alone.
This information comes from published sources about this type of product, not from the supplier.
| Standard | cat7 |
|---|---|
| Type | Network |
| Shielded | Yes |
| Length | 1 m |
| Connectors | RJ45 |
Ask on WhatsApp, and get an answer from a team that actually knows the stock.
Request a quote on WhatsApp